iConnect Training Units

OUR COMMITMENT TO QUALITY EDUCATION

At iConnect Training we strongly believe in providing the HVAC/R student with the knowledge and training for the safe and efficient operation of all types of systems found in our industry. We also believe that prior to going out into the field, the student should fully understand the theory and operational or service techniques behind each specific system.

iConnect Training provides the finest training units to the educational market. They can be found in high schools, technical colleges, government facilities and other educational settings all over the world.

The training units represent a wide variety of subjects in the heating, refrigeration, air conditioning and electrical industries. The training units range from demonstrating simple concepts to illustrating advanced troubleshooting and servicing techniques.

Showing 1–16 of 21 results

IDK-01

iManifold Training Unit Diagnostics Kit

The power of cool

The iManifold is a powerful teaching tool, using smart technology that students will embrace. See how the first iOS and Android compatible digital wireless gauge will revolutionize the HVAC industry for training and education.

TU-100 Basic Refrigeration Trainer

TU-100 Basic Refrigeration Trainer

This training unit demonstrates domestic refrigerator and freezers, self-contained air conditioning units and reverse cycle or heat pump systems.

Specifications

1/3 HP hermetically sealed reciprocating compressor Trainer operates on HFC 134A refrigerant
Panels are 1⁄4″ thick HDPE with steel reinforced component shelf
Uses HFC 134A refrigerant
Electrical requirements: 120VAC; 50/60 Hz; 10A
Overall size: 36”W x 18”D x 73”H

TU-101 domestic refrigeration build up trainer

TU-101 Domestic Refrigeration Build-Up Trainer

Companion to the motors, controls and circuit trainer (Model TU-501). Designed for the student that has a working knowledge of the theory of refrigeration. Using this trainer, students are asked to design a system to match specifications of a particular situation. Instruction kit and experiment manual provide set-up and assembly directions.

The double evaporator simulates a dual evaporator system application that demonstrates basic principles and provides service experience.

Specifications

Overall size: 36”W x 18”D x 73”H
Electrical Requirements: 120VAC, 50/60 Hz, 10 A

Build-up Trainer

Components are provided for backboard mounting in preferred arrangement. (Mounting hardware not included.)

TU-105 COMMERCIAL REFRIGERATION TRAINER

TU-105 Commercial Refrigeration Trainer

Specifications

Compressor: Single phase, 1/2 HP semi-hermetic (bolted reciprocating-type) 120VAC, 60 Hz, 15 Amp
Evaporators: Copper tube coils with aluminum fins and variable speed blower mounted on back of panel
Condenser: A forced air-cooled condenser to match compressor capacity
Uses HFC 134A refrigerant
Mounting stand: 72”W x 18”D x 72”H
Panels: 1⁄4” thick HDPE with steel reinforced component shelf
Electrical requirements: 120VAC, 60 Hz

TU-106

TU-106 Dual-Application Commercial Refrigeration Trainer

This deluxe trainer can show operation of multi-evaporator systems, dual temperature applications (low and medium) and an electric resistant heat defrost cycle.

Specifications

Compressor: Single phase, 1/2 HP semi-hermetic (bolted reciprocating-type) 120VAC, 60 Hz, 15 Amp
Condenser and Low and Medium Temperature Evaporators: Copper tube coils with aluminum fins and adjustable speed fans mounted on back of panel
Uses HFC 134a refrigerant
Mounting stand: 72″ L x 20.75″ W x 72″ H
Panels: 1⁄4″ thick HDPE with steel reinforced component shelf
Electrical requirements: 120VAC, 60 Hz

TU-155 industrial refrigeration trainer

TU-155 Industrial Refrigeration Trainer

This trainer enables students to learn principles of commercial and industrial refrigeration systems.

Specifications

Utility Requirements: city water, drain to water, and means of venting water tower
Electrical Requirements: Single phase, 240VAC, 60 Hz, 40A (115 VAC, 60 Hz for water tower)
Overall Size: 100” L x 27” W x 74” H
Water Tower: 60 Hz, single phase, 60,000 BTU/hour. (This is an optional add-on)

TU-206 Residential Air Conditioning Trainer

Real world experience in troubleshooting wiring, piping and controls of a working air conditioning unit for a whole house.

Optional Unit Configuration
• TU-206: Base unit (as shown)
• TU-206D: Base Unit with Duct Work ONLY
• TU-206TV: Base Unit and TV ONLY
• TU-206C: Base Unit with TV and duct work added

* NOTE: 240V plug not included

TU-208 forced-air and hydronic heating

TU-208 Combination Forced Air & Hydronic Heating Trainer

The forced air and hydronic heating trainer provides demonstration and service practice with forced air and hydronic heating systems, including hot water heating systems. All components are full size, completely operational and are standard brands of equipment.

  • Gas fired forced air furnace
  • Oil fired hydronic boiler
  • Air conditioner
  • Fuel tank sold separately
  • iManifold Kit for full diagnostic testing and troubleshooting of system components.

All-Electric model also available (model TU-208E)

TU-208 forced-air and hydronic heating

TU-208 Combination Forced Air & Hydronic Heating Trainer

The forced air and hydronic heating trainer provides demonstration and service practice with forced air and hydronic heating systems, including hot water heating systems. All components are full size, completely operational and are standard brands of equipment.

  • Gas fired forced air furnace
  • Oil fired hydronic boiler
  • Air conditioner
  • Fuel tank sold separately
  • iManifold Kit for full diagnostic testing and troubleshooting of system components.

All-Electric model also available (model TU-208E)

TU-302 electric heating control board

TU-302 Electric Heating Control Board

This trainer is perfect for students to learn the basics of electric heat control systems.

Specifications

120VAC, single phase, 60 Hz
Overall size: 35″W x 13″D x 30″H
Shipping Weight: 70 lbs.

TU-406 Residential Heat Pump Trainer

TU-406 Residential Heat Pump Trainer

Real world experience in troubleshooting wiring, piping and controls of a working air conditioning unit for a whole house.

Optional Unit Configuration
• TU-406: Base unit
• TU-406D: Base Unit with Duct Work ONLY
• TU-406TV: Base Unit and TV ONLY
• TU-406C: Base Unit with TV and duct work added (Deluxe as shown)

* NOTE: 240V plug not included

 

TU-420 fundamentals of refrigeration

TU-420 Refrigeration Trainer Demonstrator

This refrigeration demonstrator uses the 4 main parts of the refrigeration system (condenser, compressor, evaporator and control device) that demonstrate basic refrigeration principles. The components then work together to cool a small enclosed refrigerator compartment fully featured with an electronic temperature control device.

Specifications

Electrical requirements: 120VAC, 60 Hz, 15A
Overall size: 35”W x 13”D x 30”H
Shipping weight: 115 lbs.

TU-501 motors controls circuits build up trainer

TU-501 Motors, Controls & Circuits Build-up Trainer

Designed for the student with a working knowledge of the theory of refrigeration electrical control systems. Using this trainer, students are required to design a system to match specifications of a particular situation.

Connections between components are wired by the students.

TU-501 motors controls circuits build up trainer

TU-501 Motors, Controls & Circuits Build-up Trainer

Designed for the student with a working knowledge of the theory of refrigeration electrical control systems. Using this trainer, students are required to design a system to match specifications of a particular situation.

Connections between components are wired by the students.

TU-502 gas fired heating control-board

TU-502 Gas Fired Heating Control Board

The control board contains a complete set of electrical controls of a furnace, with air conditioning, to demonstrate basic principles and provide electrical service experience.

Specifications

Electrical Requirements: 120VAC, single phase, 60 Hz
Overall Size: 35”W x 13”D x 30”H
Shipping weight: 130 lbs.

521 single phase compressor control board

TU-521 Single Phase Compressor Control Board

Consists of an actual single phase compressor with components necessary to demonstrate all common types of controls in refrigeration and air conditioning systems.

Specifications

Electrical requirements: 120VAC, single phase, 60 Hz
Overall size: 35″W x 13″D x 30″H